Home | About REED | Used Equipment | Contacts | News | Email
REED XT36-160
Boom Specifications
Height & Reach
Vertical Reach 117'5" 35.80m
Horizontal Reach 105'0" 32.00m
Reach From Front of Truck 96'5" 29.39m
Reach Depth 81'9" 24.92m
Unfolding Height 27'9" 8.48m
4-Section Boom
1st Section Articulation 96°
2nd Section Articulation 180°
3rd Section Articulation 180°
4th Section Articulation 240°
1st Section Length 28'3" 8.61m
2nd Section Length 25'6" 7.77m
3rd Section Length 25'6" 7.77m
4th Section Length 25'7" 7.80m
General Specs
Pipeline Size (ID)Metric Ends 5.0" 125mm
  With Couplings 5.5" 140mm
Rotation 370°
End Hose: Length (Heavy-duty) 13'0" 4.00m
  Diameter 5.0" 125mm
Outrigger Spread L-R-Front 20'4" 6.20m
Outrigger Spread L-R-Rear 21'8" 6.60m
Pump Specifications
Output: 160 yd3/hr 125 m3/hr
Pressure: 825 psi 57 bar
Hard Chromed Concrete Cylinders Standard
Concrete Cylinder Diameter 9.0" 230mm
Stroke Length: 79.0" 2000mm
Maximum Strokes Per Minute: 25
Hopper Capacity 23 ft3 650 L
Volume Control Zero to Full
Hopper Grate Vibrator Standard
Hydraulic System: RRA4V125 Open-loop
Hydraulic System Pressure 5000 psi 345 bar
Hydraulic Tank Capacity (Pump) 100 gal 378 L
Hydraulic Drive Cylinders: Rod Diameter 3.15" 80 mm
  Piston Diameter 4.9" 125mm
Water Tank Capacity 130 gal 500 L
Maximum Aggregate Size 2.5" 63mm
Truck Mounted Specifications* Truck Model: Mack MR 688S
Horsepower 350
Length 37'3" 11.36m
Width 8'2" 2.49m
Height 12'6" 3.81m
Wheelbase 215" 5.46m
Front Axle Weight (Approx.) 18,350 lbs 8,340 kg
Rear Axle Weight (Approx.) 36,750 lbs 16,700 kg
Total Weight (Approx.) 55,100 lbs 25,050 kg
- Maximum theoretical performance shown above. Maximum output and pressure cannot be reached simultaneously. Performance will vary depending on slump, mix design and pipeline diameter. Specifications subject to change without prior notice.
*Dimensions vary with different truck makes, models and specifications.
REED Concrete Pumps and Guncrete Gunite Machines.
Phone: 1 (909) 287-2100
Toll Free: 1 (888) 779-7333
Fax: 909-287-2140
REED - An Independent Member of the Shea Family of Companies
13822 Oaks Avenue - Chino - California - 91710 - USA
e-mail: mike.newcomb@reedmfg.com